Where does my ip say i am
Author: p | 2025-04-24
Many people often ask themselves, What does my IP address reveal about where I am located? or Where does my IP address pinpoint my whereabouts? What does my IP Where Does My IP Say I Am. Published on . In today's digital world, our IP address can indicate more than just a series of numbers. It can reveal the geographic
Where Does My IP Say I Am - Goo.gl URL Shortener
It has been literally years I am trying to solve or at least understand a WoW problem.This may be due to my poor understanding of many suggestions I have been reading here and there, so I'll try to summarize what I did and what does not work, in a practical way.The challenge is to wake up a windows10 pc from a windows10 pc at home. My home pc is in a LAN behind a 3 home-and-life router, the pc to be awoken is in a LAN behind a Vodafone Station Revolution router. The target PC is correctly configured to be awoken, since WoL works perfectly INTHE SAME LAN.I am using Matlab MC-WOL.exe command line to send the magic packet to the target pc. From what I understand, MC-WOL uses port 65535. Following the instructions:with static DHCP in vodafone router, I mapped the MAC address of the target pc (say aa🇧🇧cc:dd:ee:ff) to its IP address in LAN (say 192.168.1.22)Forwarded port 65535 to IP address 192.168.1.22This should take care of the fact that the vodafone router, as every other commercial router, does not support broadcasting, but in this I may be wrong.Anyhow, if in a pc in the same LAN I try the command all is well, and the pc wakes up without troubleIf I try, in my pc at home MC-WOL aa🇧🇧cc:dd:ee:ff /a 11.22.33.44 (where 11.22.33.44 is the external, internet address of the vodafone router) I get the same result message (SUCCESS!! in sending the packet) but nothing happens, and the PC does not wake up.It is clear Im am missing something vital , and maybe trivial (but not for me). What am I doing wrong?Also, note that in the Vodafone LAN there is always a windows10 PC powered on, because it hosts the SQLEXPRESS used to handle our small database. Can this be of any help in finding a solution? Thank you for your understanding. May 29, 2013 38,388 3,673 156,790 #3 It has been literally years I am trying to solve or at least understand a WoW problem.This may be due to my poor understanding of many suggestions I have been reading here and there, so I'll try to summarize what I did and what does not work, in a practical way.The challenge is to wake up a windows10 pc from a windows10 pc at home. My home pc is in a LAN behind a 3 home-and-life router, the pc to be awoken is in a LAN behind a Vodafone Station Revolution router. The target PC is correctly configured to be awoken, since WoL works perfectly INTHE SAME LAN.I am using Matlab MC-WOL.exe command line to send the magic packet to the target pc. From what I understand, MC-WOL uses port 65535. Following the instructions:with static DHCP in vodafone router, I mapped the MAC address of the target pc (say aa🇧🇧cc:dd:ee:ff) to its IP address in LAN (say 192.168.1.22)Forwarded port 65535 to IP address 192.168.1.22This should take care of the fact that the vodafone router, as every other commercial. Many people often ask themselves, What does my IP address reveal about where I am located? or Where does my IP address pinpoint my whereabouts? What does my IP Where Does My IP Say I Am. Published on . In today's digital world, our IP address can indicate more than just a series of numbers. It can reveal the geographic The question Where does my IP address say I am? is more nuanced than it initially appears. Your IP address doesn't pinpoint your exact location like a GPS, but it can I want to configure the Security Services Geo-IP and Botnet but there is a warning that says Database not downloaded Does anyone know where can I download these databases? I am why does my phone say im located in colorado when I am in michigan. This location is based on the new device's IP address and might reflect the network that it's I want to configure the Security Services Geo-IP and Botnet but there is a warning that says Database not downloaded Does anyone know where can I download these databases? I am licensed. Thank you. Category: Entry Level Firewalls. But I am curious now, does the hosts file support IPv6 addresses? Lenovo says on it's FAQ it does, but only briefly, and other sources say no, so it is quite possible that is just wrong. I don't even have an IPv6 IP address for my regular IP, only cell phone uses one when I'm not on WiFi. So, I added the lines: 135 likes, 2 comments - vibeatthewall on Janu: Say it loud and proud I am allowed to say no to anything that does not serve me I am confident in my decisions trust my intuition - [SOLVED] Wake on Lan works, wake on WAN does not Thread starter Thread starter roberto21 Start date Start date Nov 1, 2021 You are using an out of date browser. It may not display this or other websites correctly.You should upgrade or use an alternative browser. #1 It has been literally years I am trying to solve or at least understand a WoW problem.This may be due to my poor understanding of many suggestions I have been reading here and there, so I'll try to summarize what I did and what does not work, in a practical way.The challenge is to wake up a windows10 pc from a windows10 pc at home. My home pc is in a LAN behind a 3 home-and-life router, the pc to be awoken is in a LAN behind a Vodafone Station Revolution router. The target PC is correctly configured to be awoken, since WoL works perfectly INTHE SAME LAN.I am using Matlab MC-WOL.exe command line to send the magic packet to the target pc. From what I understand, MC-WOL uses port 65535. Following the instructions:with static DHCP in vodafone router, I mapped the MAC address of the target pc (say aa🇧🇧cc:dd:ee:ff) to its IP address in LAN (say 192.168.1.22)Forwarded port 65535 to IP address 192.168.1.22This should take care of the fact that the vodafone router, as every other commercial router, does not support broadcasting, but in this I may be wrong.Anyhow, if in a pc in the same LAN I try the command all is well, and the pc wakes up without troubleIf I try, in my pc at home MC-WOL aa🇧🇧cc:dd:ee:ff /a 11.22.33.44 (where 11.22.33.44 is the external, internet address of the vodafone router) I get the same result message (SUCCESS!! in sending the packet) but nothing happens, and the PC does not wake up.It is clear Im am missing something vital , and maybe trivial (but not for me). What am I doing wrong?Also, note that in the Vodafone LAN there is always a windows10 PC powered on, because it hosts the SQLEXPRESS used to handle our small database. Can this be of any help in finding a solution? Thank you for your understanding. B bill001g Nov 1, 2021 I agree it is likely a mac timeout which is why this hack doesn't work on most routers. WOL has no concept of IP addresses so it can not technically be done from a different subnet. Some WOL clients also enforce that the WOL packet must be sent to the broadcast mac addresses rather than the machine mac address.The other way this might work is to put in a port forward rule to the broadcast IP. So your port map port 65535 to 192.168.1.255. Depends how smart the router is. Many routers disable this because someone can denial of service attack you. The other method is to put in a static ARP entry (not possible on most consumer routers) and map some dummy IP like 192.168.0.100 to the broadcast mac address FF:FF:FF:FF:FF:FF... #2Comments
It has been literally years I am trying to solve or at least understand a WoW problem.This may be due to my poor understanding of many suggestions I have been reading here and there, so I'll try to summarize what I did and what does not work, in a practical way.The challenge is to wake up a windows10 pc from a windows10 pc at home. My home pc is in a LAN behind a 3 home-and-life router, the pc to be awoken is in a LAN behind a Vodafone Station Revolution router. The target PC is correctly configured to be awoken, since WoL works perfectly INTHE SAME LAN.I am using Matlab MC-WOL.exe command line to send the magic packet to the target pc. From what I understand, MC-WOL uses port 65535. Following the instructions:with static DHCP in vodafone router, I mapped the MAC address of the target pc (say aa🇧🇧cc:dd:ee:ff) to its IP address in LAN (say 192.168.1.22)Forwarded port 65535 to IP address 192.168.1.22This should take care of the fact that the vodafone router, as every other commercial router, does not support broadcasting, but in this I may be wrong.Anyhow, if in a pc in the same LAN I try the command all is well, and the pc wakes up without troubleIf I try, in my pc at home MC-WOL aa🇧🇧cc:dd:ee:ff /a 11.22.33.44 (where 11.22.33.44 is the external, internet address of the vodafone router) I get the same result message (SUCCESS!! in sending the packet) but nothing happens, and the PC does not wake up.It is clear Im am missing something vital , and maybe trivial (but not for me). What am I doing wrong?Also, note that in the Vodafone LAN there is always a windows10 PC powered on, because it hosts the SQLEXPRESS used to handle our small database. Can this be of any help in finding a solution? Thank you for your understanding. May 29, 2013 38,388 3,673 156,790 #3 It has been literally years I am trying to solve or at least understand a WoW problem.This may be due to my poor understanding of many suggestions I have been reading here and there, so I'll try to summarize what I did and what does not work, in a practical way.The challenge is to wake up a windows10 pc from a windows10 pc at home. My home pc is in a LAN behind a 3 home-and-life router, the pc to be awoken is in a LAN behind a Vodafone Station Revolution router. The target PC is correctly configured to be awoken, since WoL works perfectly INTHE SAME LAN.I am using Matlab MC-WOL.exe command line to send the magic packet to the target pc. From what I understand, MC-WOL uses port 65535. Following the instructions:with static DHCP in vodafone router, I mapped the MAC address of the target pc (say aa🇧🇧cc:dd:ee:ff) to its IP address in LAN (say 192.168.1.22)Forwarded port 65535 to IP address 192.168.1.22This should take care of the fact that the vodafone router, as every other commercial
2025-04-23[SOLVED] Wake on Lan works, wake on WAN does not Thread starter Thread starter roberto21 Start date Start date Nov 1, 2021 You are using an out of date browser. It may not display this or other websites correctly.You should upgrade or use an alternative browser. #1 It has been literally years I am trying to solve or at least understand a WoW problem.This may be due to my poor understanding of many suggestions I have been reading here and there, so I'll try to summarize what I did and what does not work, in a practical way.The challenge is to wake up a windows10 pc from a windows10 pc at home. My home pc is in a LAN behind a 3 home-and-life router, the pc to be awoken is in a LAN behind a Vodafone Station Revolution router. The target PC is correctly configured to be awoken, since WoL works perfectly INTHE SAME LAN.I am using Matlab MC-WOL.exe command line to send the magic packet to the target pc. From what I understand, MC-WOL uses port 65535. Following the instructions:with static DHCP in vodafone router, I mapped the MAC address of the target pc (say aa🇧🇧cc:dd:ee:ff) to its IP address in LAN (say 192.168.1.22)Forwarded port 65535 to IP address 192.168.1.22This should take care of the fact that the vodafone router, as every other commercial router, does not support broadcasting, but in this I may be wrong.Anyhow, if in a pc in the same LAN I try the command all is well, and the pc wakes up without troubleIf I try, in my pc at home MC-WOL aa🇧🇧cc:dd:ee:ff /a 11.22.33.44 (where 11.22.33.44 is the external, internet address of the vodafone router) I get the same result message (SUCCESS!! in sending the packet) but nothing happens, and the PC does not wake up.It is clear Im am missing something vital , and maybe trivial (but not for me). What am I doing wrong?Also, note that in the Vodafone LAN there is always a windows10 PC powered on, because it hosts the SQLEXPRESS used to handle our small database. Can this be of any help in finding a solution? Thank you for your understanding. B bill001g Nov 1, 2021 I agree it is likely a mac timeout which is why this hack doesn't work on most routers. WOL has no concept of IP addresses so it can not technically be done from a different subnet. Some WOL clients also enforce that the WOL packet must be sent to the broadcast mac addresses rather than the machine mac address.The other way this might work is to put in a port forward rule to the broadcast IP. So your port map port 65535 to 192.168.1.255. Depends how smart the router is. Many routers disable this because someone can denial of service attack you. The other method is to put in a static ARP entry (not possible on most consumer routers) and map some dummy IP like 192.168.0.100 to the broadcast mac address FF:FF:FF:FF:FF:FF... #2
2025-04-0119, 2010 4:55 am hi greggi follow your ipsec video tutorial this afternoon and i try my 2 mik router with public static ip each, but it doesnt handshake the log shows nothing, router a ROS 3.30 >> ROS 4.2 or incompatible in deffrent version of ROS? gregsowell Member Candidate Topic Author Posts: 128 Joined: Tue Aug 28, 2007 1:24 am Contact: Re: Basic Mikrotik Training Videos - FREE - *Update 01/04/2010* #35 Tue Jan 19, 2010 5:07 am hi greggi follow your ipsec video tutorial this afternoon and i try my 2 mik router with public static ip each, but it doesnt handshake the log shows nothing, router a ROS 3.30 >> ROS 4.2 or incompatible in deffrent version of ROS?Myron,If you went to system->logging-> and added IPSec to go to memeory, then saw nothing in the logs while testing, you most likely don't have a policy configured correctly. When you try and ping via winbox, specify source interface and test...does it say packet rejected? Did you add the src-nat accept?Greg Myron Member Candidate Posts: 253 Joined: Sat Sep 05, 2009 3:17 am Location: Boracay, Philippines Re: Basic Mikrotik Training Videos - FREE - *Update 01/04/2010* #36 Tue Jan 19, 2010 7:54 am hi greggi follow your ipsec video tutorial this afternoon and i try my 2 mik router with public static ip each, but it doesnt handshake the log shows nothing, router a ROS 3.30 >> ROS 4.2 or incompatible in deffrent version of ROS?Myron,If you went to system->logging-> and added IPSec to go to memeory, then saw nothing in the logs while testing, you most likely don't have a policy configured correctly. When you try and ping via winbox, specify source interface and test...does it say packet rejected? Did you add the src-nat accept?Gregim gonna reconfig tonight gregg i update you soon whats result anyway thanks for replyregards Myron Member Candidate Posts: 253 Joined: Sat Sep 05, 2009 3:17 am Location: Boracay, Philippines Re: Basic Mikrotik Training Videos - FREE - *Update 01/04/2010* #37 Wed Jan 20, 2010 4:48 am hi greggi follow your ipsec video tutorial this afternoon and i try my 2 mik router with public static ip each, but it doesnt handshake the log shows nothing, router a ROS 3.30 >> ROS 4.2 or incompatible in deffrent version of ROS?Myron,If you went to system->logging-> and added IPSec to go to memeory, then saw nothing in the logs while testing, you most likely don't have a policy configured correctly. When you try and ping via winbox, specify source interface and test...does it say packet rejected? Did you add the src-nat accept?Gregim gonna reconfig tonight gregg i update you soon whats result anyway thanks for replyregardshi gregg heres my setup router a/system loggingadd action=memory disabled=no prefix="" topics=infoadd action=memory disabled=no prefix="" topics=erroradd action=memory disabled=no prefix="" topics=warningadd action=echo disabled=no prefix="" topics=criticaladd action=memory disabled=no prefix="" topics=ipsec/ip ipsec proposalset default auth-algorithms=sha1 disabled=no enc-algorithms=3des lifetime=30m name=default pfs-group=modp1024/ip ipsec peeradd address=x.x.x.202/32:500 auth-method=pre-shared-key dh-group=modp1024 disabled=no dpd-interval=\ disable-dpd dpd-maximum-failures=1 enc-algorithm=3des exchange-mode=main generate-policy=no hash-algorithm=md5 \
2025-04-21