Usb to com port driver

Author: m | 2025-04-24

Install the USB-COM Port Driver. Install the USB-COM Port Driver, referring to the user’s manual. Search for: Archives A Virtual Com Port Driver for USB to COM converter Introduction. USB2COM is a virtual com port driver (Windows2025/XP) for Cypess USB-HID- COM device, and compatible devices. USB

USB com port driver - SICK

Port is open. (3)The process of transferring data to the USB device has been improved. Feb 17,2014 2.0.0.23 (1) Improved to support the function that can automatically resume COM communication. Note: Users are strongly recommended to use the upgraded version 2.0.0.23. Aug 23,2013 2.0.0.22 (1)There was a case in the current version that data communication was not started even though the BHT was reconnected if the USB device was determined to be removed from the USB port in the process of data transmission. This is improved and fixed in the new version. (2)There was a case in the current version, though it was very rare, that the USB host controller on the PC did not respond to the request command from the driver, which as a result caused a BSoD. This is improved and fixed in the new version. Jul 11,2013 2.0.0.20 (1)Windows 8 (32-bit/64-bit version) is supported. (2)The phenomenon in which the application on the PC side was changed to a “No response” state on rare occasions is improved. Apr 08,2013 2.0.0.18 (1)Improved the process of removing the USB device from the PC. (2)Improved the process of opening the COM port. Dec 05,2012 2.0.0.16 In configuration that the Active USB-COM Port Driver is used between the BA series and the QR-kbif, when the QR-kbif was activated with the “-d” option and tries to connect the scanner, the processing of the Active USB-COM Port Driver has been improved. Apr 09,2012 2.0.0.13 (1) The phenomenon, in which the communication application on the PC side became unresponsive during data transfer on rare occasions, is improved in the new version. Nov 04,2011 2.0.0.12 (1)Supported for Windows7 64bit version. (2)Improved the data reception processing from the USB device. (3)Improved the processing when the USB device is connected. Sep 01,2010 2.0.0.10 (1)Supported for Windows 7（32bit version) (2)Improved reconnection process in case of losing the connection with USB device. Jan 20,2010 2.0.0.7 (1)Improved the process of executing opening /closing COM port in application software in disconnecting USB device. Jan 19,2009 2.0.0.6 (1)Support Windows Vista (32bit). (2)Added the displaying information of the "safty remove hardware" icon on the task-tray. Aug 31,2007 2.0.0.4 (1)Released for CU-221/CU-421 to use MS ActiveSync with MS infrared driver. Aug 25,2006 Note about version up of Windows If you want to upgrade your Windows PC that installed the Active USB-COM Port Driver to the new version of Windows, please implement the following steps. •STEP1:Before you upgrade the Windows PC, please uninstall the Active USB-COM Port Driver. •STEP2:Please upgrade the version of Windows. •STEP3:Please install the Active USB-COM Port Driver. How to install Active USB-COM Port Driver 1. Uninstall the old version's driver Please uninstall the old version's Active USB-COM Port Driver by the

Virtual Usb Com Port Driver - sharewarejunction.com

The information below explains the various connection types for GPS makes. Serial GPSConnect the GPS serial cable to the COM port of your computer taking a note of the COM port number you have connected to (some computers may have the ports marked COM1, COM2 or Serial 1, Serial 2. Check the manual for your computer). In OziExplorer configuration, select this as the Com port to use. Garmin USB GPSThese plug directly into a USB port and do not require a serial port at all. Magellan USB GPSThese plug directly into a USB port. When the GPS is set to NMEA Data Comm Mode the GPS creates a new Serial Port on the PC and connects to the PC as a Modem on the Serial Port. NMEA data is transmitted through the serial port. If you do not know the port number, the GpsPortChecker will help locate the port number used or check the port number in Windows Settings / Control Panel / System / Device Manager (in the Modems section). In OziExplorer configuration, select this as the Com port to use. USB Mouse Type GPSThe GPS will come with a driver which will add a virtual serial port to your PC when you install the driver. You need to note the port number which is configured by the driver. If you do not know the port number, the GpsPortChecker will help locate the port number used or check the port number in Windows Settings / Control Panel / System / Device Manager. In OziExplorer configuration, select this as the Com port to use. Compact Flash or SDIO GPSThe plug-in compact flash type GPS will add a virtual serial port to your PC when you install the driver. Some may be supplied with a driver which you need to install (SDIO GPS) but most will not require a driver.You need to note the port number which is configured by the driver. If you do not know the port number, the GpsPortChecker program will help locate the port number used or check the port number in Windows Settings / Control Panel / System / Device Manager. In OziExplorer configuration, select this as the Com Port to use. Bluetooth GPSYou need to know the serial port (COM port number) configured by Bluetooth on your computer. If you do not know the port number, the GpsPortChecker will help locate the port number used or check the port number in Windows Settings / Control Panel / System / Device Manager. In OziExplorer configuration, select this as the Com port to use.

Active USB-COM Port Driver - ICS

TH-D74A/ETH-D75A/EVirtual COM Port Driver January 16, 2024 Introduction Thank you for choosing the KENWOOD transceiver. You can connect your TH-D74A/E or TH-D75A/E to a PC via a USB cable, and then utilize the Frequency Control Programs or Memory Control Programs we have provided. After reading through the following explanations, feel free to download and install the software. Operating Environment 1. Operating System (OS) Windows 10 Windows 11 ®--> Notes: This software is designed to run on the above operating systems. Applicable operating systems are subject to change without notice due to the end of the technical support by Microsoft Corporation or change of the product specifications. 2. Peripheral Devices USB 2.0 interface. Installing the virtual COM port driver ATTENTION: Do not connect the device to a PC before installing the virtual COM port driver. 1. Extract the downloaded file "USB_CDC_Driver_TH-D75_V100.zip" into a designated folder. In the designated folder, a folder labeled "USB_CDC_Driver_TH-D75_V100" will be created. In the folder labeled "USB_CDC_Driver_TH-D75_V100", double click the "dpinst.exe" in the folder "x86" with 32-bit OS, or the "dpinst.exe" in the folder "x64" with 64-bit OS. After a few moments, the following window is displayed. Click [Next>]. 2. The following window is displayed, and the driver installation will begin. Wait until the installation is completed. 3. After a few moments, the following window is displayed. Click [Finish] to complete installation and exit. Connecting the device to a PC Turn the transceiver power ON, then connect it to a PC via a USB cable for the transceiver. The PC will detect new hardware. The installation of the device driver software will start automatically. If a reboot request appears, please reboot the PC. Confirming the COM port number Open the "Device Manager" to confirm which COM port number is assigned for connection with the transceiver. (Confirm the COM port number after turning on the transceiver and connecting the transceiver to the PC using a USB cable.) 1. Right-click the Windows [Start] button. 2. Click [Device Manager] in the displayed window. 3. [Device Manager] window will appear. Click "Ports (COM & LPT)" to extend it, then you can find "TH-Dxx (COMxx)". The "COMxx" number is different depending on your PC. In the above example, "TH-D75 (COM3)" is listed. This means that COM3 is assigned for the connection with the TH-D75A/E. Select this port number in the configurations for communication in the software you are using. If you agree with the details listed above, click the following link to download the virtual COM port driver installation program. "USB_CDC_Driver_TH-D75_V100.zip" 662KB download Update History Ver.1.00 (January 16, 2024) First release. (TH-D74/D75 compatible) Ver.1.00 (September 16, 2016) First Release. (TH-D74 only) Windows®, and Windows logo are registered trademarks of Microsoft Corporation in. Install the USB-COM Port Driver. Install the USB-COM Port Driver, referring to the user’s manual. Search for: Archives

USB to COM Converter - Virtual Com Port Driver - SourceForge

TS-990S, TS-890S, TS-590SG, TS-590S, TH-D72A/E KPG-22U, KPG-46U, KPG-186U Virtual COM Port Driver Last updated : January 8, 2025 Introduction Thank you for choosing the KENWOOD transceivers. You can connect your TS-990S, TS-890S, TS-590SG, TS-590S, or TH-D72A/E to a PC via a USB cable, or you can connect your TH-K20A/E, TH-K40A/E, TM-281A/E, TM-481A, or other transceivers to a PC via the KPG-22U/46U/186U programming cables by installing the virtual COM port driver in the PC, and then utilize the Radio Control Program, Memory Control Program, or other software we have provided. This virtual COM port driver installation program is provided by Silicon Laboratories Inc. After reading through the following explanations, feel free to download and install the software. Operating Environment 1. Operating System (OS) Windows® 10Windows® 11 2. Peripheral Devices USB 2.0 interface. Installing the virtual COM port driver ATTENTION: Do not connect the device to a PC before installing the virtual COM port driver. If the device is connected to a PC before installing the virtual COM port driver, an incompatible driver may be installed and the PC may not be able to communicate properly with the target device. In this case, delete the incompatible driver, install the correct driver, and then connect the target device to the PC again. Extract the downloaded file "CP210x_Universal_Windows_Driver.zip" into a designated folder.In the designated folder, a folder labeled "CP210x_Universal_Windows_Driver" will be created. In the created folder "CP210x_Universal_Windows_Driver", right-click the "silabser.inf" and select "Install (I)", then follow the instructions that appear on the display to install the virtual COM port driver. Connecting the device to a PC Turn the transceiver power ON, then connect it to a PC via a connection cable for the transceiver. The PC will detect new hardware. The installation of the device driver software will start automatically. If a reboot request appears, please reboot the PC. Confirming the COM port number Open the "Device Manager" to confirm which COM port number is assigned for connection with the device. (Confirm the COM port number after turning on the transceiver and connecting the transceiver to the PC using a USB cable, or after connecting the KPG-22U/46U/186U to the PC.) 1. Right-click the Windows® [Start] button. 2. Click [Device Manager] in the displayed window. 3. [Device Manager] window will appear. Click “Ports (COM & LPT)” to extend it, then you can find “Silicon Labs CP210x USB to UART Bridge (COMxx)”.The “COMxx” number is different

Prolific PL2303GS USB Serial COM Port port (COM/LPT/Serial) drivers

Use of the Windows Control Panel “Programs and Functions” as the Administrator. 2. Extract the installation file Please extract the downloaded file "ActiveUSBCOM_xxxx_E.ZIP". (xxxx is its version.) 3. Install the Active USB-COM Port Driver Please install the installer program as the Administrator, referring to the installation manual. Features of the Active USB-COM Port Driver 1.Features: The USB device can be removed from the PC USB Port while the application opens the Serial Port with which the USB device is connected. (It will be kept opening when the USB device is plugged into the USB Port again.) The Virtual Serial Port is always existed on PC even if USB device is removed from the PC USB Port, so that the Serial Port can be opened anytime. On the task tray or the Device Manager, the COM port is confirmed which port the USB device is connected with. 2.Supported Devices: Please confirm supported models from our product pages. 3.Notice: •Before installation of this driver, please read the precaution statement written in the user's guide included in the downloaded file. If you have not registered The services on this member site are available only for registered customers. New member reg.

Prolific PL2303GB USB Serial COM Port port (COM/LPT/Serial) drivers

Windows operating systems on different computers. Mais informações... Mais PL-2303 USB-to-Serial 1.16 PL-2303 USB-to-Serial - Shareware - PL-2303 USB-to-Serial é um dispositivo que permite a comunicação entre um computador e um dispositivo de porta serial. O dispositivo é fabricado pela empresa PL-2303 USB-to-Serial e usa tecnologia USB para transmitir dados. Mais informações... Mais eM Client 10.1.4828.0 eM Client s.r.o. - 47,3MB - Shareware - eM Client Review: Efficient Email Management SoftwareLooking for a reliable email client that can handle all your communication needs in one place? Look no further than eM Client by eM Client s.r.o. Mais informações... Mais Intel(R) Serial IO 30.100.2221.20 Intel Corporation - Shareware - Mais informações... R Mais Realtek Audio COM Components 1.0.2 REALTEK Semiconductor Corp. - Shareware - Realtek Audio COM Components é um pacote de software desenvolvido pela REALTEK Semiconductor Corp. que fornece drivers de áudio e ferramentas para sistemas operacionais Windows. Mais informações... V Mais Virtual COM Port Driver 1.4 STMicroelectronics - Shareware - STMicroelectronics offers a Virtual COM Port Driver that allows the communication between the computer and the STM32 microcontroller through a USB connection. Mais informações... Mais UpdateStar Premium Edition 15.0.1962 UpdateStar - 8,2MB - Commercial - UpdateStar Premium Edition: Uma ferramenta prática para gerenciar suas atualizações de software O UpdateStar Premium Edition é uma ferramenta de gerenciamento de software projetada para ajudar a manter seu PC em sua melhor … Mais informações... Mais USB Serial Port Driver 1.1.13.1605 Nokia - Shareware - Nokia has developed a USB Serial Port driver that allows users to connect their Nokia devices to a computer via USB cable. Mais informações... P Mais PL23XX USB-to-Serial 4.0.8 Prolific Technology INC - Shareware - PL23XX is a USB-to-Serial converter designed and manufactured by Prolific Technology INC. It is compatible with Windows, Mac OS X, and Linux operating systems. Mais informações... Mais Microsoft Visual C++ 2010 Redistributable 12.0.30501 Microsoft - Freeware - Revisão: Microsoft Visual C++ 2010 Redistributable pela MicrosoftMicrosoft Visual C++ 2010 Redistributable é um aplicativo de software desenvolvido pela Microsoft que fornece componentes de tempo de execução para programas criados com o … Mais informações...

MediaTek USB Port port (COM/LPT/Serial) drivers - Treexy

I’ve been building a new project using an ESP32 microcontroller. Plugging the ESP32 into my Windows development laptop wasn’t showing up the com port for the device. Looking into Device Manager I saw the error below associated with the CP2102 USB to UART Bridge Controller. After some searching I found the CP210x USB to UART Bridge Virtual COM Port (VCP) drivers are required for device operation as a virtual com port to facilitate host communication with CP210x products. The Windows Universal Driver (along with drivers for other platforms) can be downloaded from Silicon Labs website here. After extracting the archive I installed the driver by right clicking on the silabser.inf file …… and selecting Install. Following the installation of the CP2102 USB to UART Bridge Controller driver I was able to see the device under Ports (COM & LPT) along with the communications port number it had been assigned. Hopefully this helps someone else as well as myself the next time I’ve got a laptop without the virtual com port driver installed.. Install the USB-COM Port Driver. Install the USB-COM Port Driver, referring to the user’s manual. Search for: Archives

Samsung USB Port port (COM/LPT/Serial) drivers - Treexy

Home Barcode Hardware Barcode Scanners Resolved Questions Resolved Questions FulanoNadie Tagged With:- Sc7-usb-2d Sc7usb Virtual Com 64-bit We know that the typical settings on an SC7-USB-2D use the USB drivers installed by the operating system (as we have on Mac, Windows, and Linux). We know that the drivers installed by default do not require any extra involvement on our part since the scanner is treated as a keyboard by those operating systems.We need help with the drivers for some of the SC7-USB-2D scanners using USB Virtual COM emulation on 64-bit Windows since we have some applications that will only accept COM input. When we switch the emulation over by scanning the barcode on the manual (PDF page 17, web page 21), called “USB Virtual COM”, Windows starts looking for the driver, but then states it could not find the drivers needed. Thank you for your guidance! Operating System: Windows 64 bit Application: Environments that require COM input 11-18-13 11.2 year(s) ago Report Abuse James Best Answer NOTE: The following process:* Is not officially supported by IDAutomation Technical support, as it is outside of the scope of support, and is provided here as a courtesy.* Is not necessary for typical use of the SC7-USB-2D, as the drivers are automatically maintained and installed by each operating system (OS) vendor. * Only applies to 64-bit versions of the Microsoft Windows® OS and programs that require the older COM-based input system.USB Virtual COM Emulation:The drivers spoken of may be obtained by Honeywell since they maintain the driver.Download and extract the HSM USB Serial WHQL package.If the driver is not available, search the site for "HSM USB Serial Driver."* Before continuing with the driver installation, please unplug the SC7-USB-2D while it is still in USB mode (if not, you may scan the 'USB HID (PC)' barcode in the manual).* As Administrator, run the file called 'Install_x64.bat' (from a local directory with read/write permissions, not a network location) and let the installer finish.* Plug the SC7-USB-2D back into a different USB port to force Windows to search for the driver.* Confirm successful driver installation by checking Control Panel > Device Manager > Ports (COM & LPT)- you should see the scanner recognized as something similar to '5180 Area Imager (COM #), where COM # is the next COM port- automatically assigned (yours might look a little different): To modify the COM port:* Right-click on the 5180

Active USB-COM Port Driver - DENSO WAVE

Audio Driver, REALTEK Semiconductor Corp. tarafından geliştirilen bir yazılım uygulamasıdır. Daha fazla bilgi ... Daha Driver Booster 12.3.0.557 IObit - 16,8MB - Shareware - Editörün Değerlendirmesi: IObit'ten Driver BoosterIObit tarafından geliştirilen Driver Booster, kullanıcıların sistem sürücülerini optimum performans için güncel tutmalarına yardımcı olmak için tasarlanmış güçlü bir sürücü güncelleme … Daha fazla bilgi ... Daha USB Serial Port Driver 1.1.13.1605 Nokia - Shareware - Nokia, kullanıcıların Nokia cihazlarını USB kablosuyla bir bilgisayara bağlamalarına olanak tanıyan bir USB Seri Bağlantı Noktası sürücüsü geliştirmiştir. Daha fazla bilgi ... Daha Advanced Port Scanner 2.5.3869 Famatech International Corp. - 8,4MB - Freeware - Advanced Port Scanner, ağ bilgisayarları üzerindeki açık portları (TCP ve UDP) hızlı bir şekilde bulmanıza ve tespit edilen portlar üzerinde çalışan programların sürüm bilgilerini almanıza olanak sağlayan ücretsiz bir ağ tarayıcıdır. Daha fazla bilgi ... V Daha Virtual COM Port Driver 1.4 STMicroelectronics - Shareware - STMicroelectronics, bilgisayar ile STM32 mikrodenetleyici arasında bir USB bağlantısı üzerinden iletişime izin veren bir Sanal COM Bağlantı Noktası Sürücüsü sunar. Daha fazla bilgi ... Daha VLC media player 3.0.21 VideoLAN Team - 40,1MB - Freeware - VLC Medya Oynatıcı İncelemesiVLC media player, VideoLAN projesi tarafından oluşturulan ücretsiz ve açık kaynaklı bir çapraz platform multimedya oynatıcıdır. Daha fazla bilgi ... redmon port redirection download arama sonuçları redmon port redirection download İçeren açıklamalar Daha PuTTY 0.83 Simon Tatham - 0,5MB - Open Source - PuTTY by Simon Tatham, kullanıcılara uzak sunuculara, cihazlara ve sistemlere erişmenin güvenli bir yolunu sağlayan popüler bir açık kaynaklı terminal emülatörü ve SSH. Install the USB-COM Port Driver. Install the USB-COM Port Driver, referring to the user’s manual. Search for: Archives

USBDeview - Uninstall USB Drivers and inactive COM Ports

A Microsoft Windows-based PC is connected to the USB console port on the switch.Installing the Cisco Microsoft Windows XP USB DriverInstalling the Cisco Microsoft Windows 2000 USB DriverInstalling the Cisco Microsoft Windows Vista and Windows 7 USB DriverInstalling the Cisco Microsoft Windows XP USB DriverInstalling the Cisco Microsoft Windows 2000 USB DriverInstalling the Cisco Microsoft Windows Vista and Windows 7 USB DriverInstalling the Cisco Microsoft Windows XP USB DriverProcedureStep 1 Obtain the Cisco USB console driver file from the Cisco.com web site and unzip it. Note You can download the driver file from the Cisco.com site for downloading the switch software.Step 2 If using 32-bit Windows XP, double-click the setup.exe file in the Windows_32 folder. If using 64-bit Windows XP, double-click the setup(x64).exe file in the Windows_64 folder.Step 3 The Cisco Virtual Com InstallShield Wizard begins.Step 4 The Ready to Install the Program window appears. Click Install.Step 5 The InstallShield Wizard Completed window appears. Click Finish.Step 6 Connect the USB cable to the PC and the switch console port. The USB console port LED turns green, and the Found New Hardware Wizard appears. Follow the instructions to complete the driver installation.Installing the Cisco Microsoft Windows 2000 USB DriverProcedureStep 1 Obtain the Cisco USB console driver file from the Cisco.com web site and unzip it. Note You can download the driver file from the Cisco.com site for downloading the switch software.Step 2 Double-click the setup.exe file.Step 3 The Cisco Virtual Com InstallShield Wizard begins. Click Next.Step 4 The Ready to Install the Program window appears. Click Install.Step 5 The InstallShield Wizard Completed window appears. Click Finish.Step 6 Connect the USB cable to the PC and the switch console port. The USB console port LED turns green, and the Found New Hardware Wizard appears. Follow the instructions to complete the driver installation.Installing the Cisco Microsoft Windows Vista and Windows 7 USB DriverProcedureStep 1 Obtain the Cisco USB console driver file from the Cisco.com web site and unzip it. Note You can download the driver file from the Cisco.com site for downloading the switch software.Step 2 If using 32-bit Windows Vista or Windows